Yoogee teaches you how to easily solve the cleaning problem of crystal lamps and what you need to pay attention to when wiping crystal lamps?

Crystal lamps are bright, elegant and gorgeous when used in daily life. They have always been a high-end name. However, although crystal lamps are gorgeous and beautiful, they are also a big problem in daily maintenance.

 Furniture needs maintenance, and lamps as important decorations in our homes also need cleaning and maintenance. Although the crystal lamp itself has a bright appearance, if we do not pay attention to the cleaning of the crystal lamp in our daily life, it may make the crystal lamp lose its original charm. How to clean the crystal lamp? What to use to clean it?

One: To clean the crystal lamp, we must first understand what kind of cleaning agents are used to clean the crystal lamp. The most commonly used crystal lamp cleaning agents in our daily life are as follows:

1. Spraying special cleaning agent

This cleaning agent is a cleaning agent specially used for cleaning crystal lamps. You only need to spray the cleaning agent on the crystal lamp. You don’t need to use a cloth to wipe it. The dust on the crystal ball will be taken away with the evaporation of the cleaning agent. It is very simple.

2. Kerosene

Kerosene is a good cleaning agent for cleaning the dirt on the crystal surface. We carefully remove the crystal lamp, then put it in kerosene, and then use a toothbrush to gently brush the crystal surface. After washing it, use laundry detergent to brush it again.

Two: Crystal lamp cleaning method

Due to the special material of crystal lamp, we need to pay attention to several methods and skills when cleaning crystal lamp:

1. When cleaning crystal lamp, we must pay attention to cleaning safety, that is, when we clean crystal lamp, especially when wiping lamp frame, we must remember to cut off the power supply and remove the bulb, and wait until the lamp frame is wiped clean before installing it.
2. When cleaning crystal lamp, we must keep the balance of the lamp body, which means that if we need to remove the beads when cleaning, we cannot remove the crystals one by one, but evenly from both sides, so as to prevent the phenomenon of the lamp body tilting due to inconsistent weight and reduce the probability of crystal damage.
3. When we wipe the bracket accessories of crystal lamp, we must pay attention to the soft cloth used to wipe the bracket cannot be stained with water or alcohol, so as not to damage the protective film outside the bracket electroplating layer, causing its surface to lose gloss.
4. When we clean crystal lamp, if we find that the connecting buckle between the beads is discolored or rusted, we can replace it by the way to ensure the beauty of crystal lamp.

Three: Seven points to note for daily cleaning and maintenance of crystal lamps:

1. Safe operation: Since the cleaning and maintenance of large crystal chandeliers often require high-altitude operations, it is necessary to pay great attention to the safety of workers, work platforms and lamps. Generally, only one or two cleanings are required each year to maintain the good effect of being as bright as new and charming.
2. Replacement of bulbs: During the cleaning process, if you replace bulbs, it is recommended to use brand-name products with good quality and long life to avoid the problem of "the east is not bright and the west is bright", which affects the appearance.
3. Crystal bead dust removal: If conditions permit, if you used low-grade crystal beads in the past, you can consider changing to high-quality high-grade crystal beads; the surface of high-quality high-grade crystal beads has a dust-proof treatment process, which is not easy to get dusty and has better effects. Usually, you should pay attention to prevent the damage of oil smoke to crystal lighting, so as to keep the crystal ball or crystal piece crystal clear for a long time.
4. Lamp frame renovation: The real electroplated gold lamp frame can generally last for three to five years or longer without fading; you can consider renovating it after three years, that is, it will feel brand new.
5. Regular inspection: The safety and stability of lamps hung in important positions or places with a lot of people should be the first priority. The headlights often weigh hundreds of kilograms. If they fall, the consequences will be disastrous. Therefore, people should be sent to check the embedded parts and load-bearing hooks and chains hidden in the ceiling regularly to prevent accidents caused by aging without being noticed.
6. Timely update: If possible, the performance of the internal wires should be checked at the same time. If sticking or aging is found, they should be replaced immediately to ensure safety.

Crystal lamps must be cleaned regularly, because regular cleaning can ensure the refractive index of crystal lamps and make the lights brighter. This is the specific content of how to clean crystal lamps introduced by yoogee today. I hope it can help you better!